Key points for the attention to installing the fuel tank of the generator set

    1. The position of the oil tank oil supply pipe should be higher than the bottom of 50 mm at the bottom of the diesel generator set, preventing the sediment and water from being sucked into the oil supply pipe; the oil supply and oil supply and oil supply area should be provided to reduce diesel generator sets Heat exchange. The fuel capacity in the tank should ensure a daily supply.

    2. The storage location of the fuel tank must be safe to prevent fire. Drums or tank should be placed in a conspicuous place separately, away from the diesel generator suitable, non-smoking; even when the diesel generator shut down, the fuel is not allowed by gravity through the pipe into the intake pipe or the fuel injection diesel engine.

    3. If the users create their own tank, the tank should be noted that the standby diesel generator made of stainless steel or a steel plate. Not to be painted or galvanized inside the reservoir, because the chemical reaction which will occur with the diesel fuel, generation of impurities, diesel generator may be damaged, reducing the quality and cleanliness of diesel fuel combustion efficiency.

    4. When using cleaning filters, oil resistance port must not exceed a predetermined value for all diesel generator set performance data table. The resistance value of the fuel in the tank is half of the reference; the return line connection should not cause a shock wave in the fuel line in a diesel generator set.

    5. After placing the fuel tank, the oil level can not exceed the maximum diesel generator base 2.5 meters. If the oil level is higher than the large depots 2.5 meters, should be added between the large depots and diesel generator sets for everyday use. Direct supply of the tank so that pressure does not exceed 2.5 meters. "

3007632 bowl plug  for Cummins M11-310 diesel engine cylinder block accessory set  marine accessories

3090255 Thrust Bearing

3081724 Seal  Split Ring 

Upper repair kit for Cummins diesel engine 3801141

Camshaft of imported Cummins diesel engine 3081620

KTA50G3G8G9 camshaft thrust bearing 3007971

Male threaded joint 3631096 male threaded joint of Cummins diesel engine diesel engine

C3992090 gasket used in the diesel engine of Cummins diesel engine

Cylinder block 4933931 Cylinder block of Cummins diesel engine of Cummins Diesel engine

BB2706-03 Idler Gears 

3088161 wear-resistant cover plate  used for Cummins M11-C350 main engine cylinder block group  paver accessories

Cummins Diesel Engine's 3905048

KTA19-M diesel engine oil seal 3628895 is used for marine main engine SO40374

KTA19-P600 outlet pipe joint 3002192

Throttle valve plate 4013191 Throttle valve plate of Cummins diesel engine diesel engine

3000278 water tank  used for NTA855-C360 power engine parts set of Cummins diesel engine 

Fuel injection pump Cummins diesel engine 3908667 diesel engine 3908667 fuel injection pump

3883510 rectangular sealing ring  used for Cummins ISM320V main engine cylinder block group  marine accessories

Cummins diesel engine's 3940152 (intake seat ring)

KTA38-P1014 Hexagon Bolt NULL

Cummins diesel engine oil pan 4914257

3028279 Hexagon bolts  used for NTA855-C400 main engine performance parts set of Cummins diesel engine 

Turbocharger Cummins diesel engine's cummins engine diesel engine's 4944865 turbocharger

68171 cylindrical pin  used for KTA38-G2-660KW diesel engine fan arrangement group of Cummins diesel engine 

BB4727 Front Gear Room Cover

4098515 Gear cover plate

4098514 Gear Cover for Cummins Diesel Engine

4922241 Washing machine captive screw

QSK19 nut heavy hexagon

KTA19-C525 plate air deflec

3003550 TBE OUT of Cummins Diesel Engine